Flash fans can breathe a collective sigh of relief -- Adobe has confirmed that the next version of Windows will, in fact, support work built on its once ubiquitous web publishing platform. Windows 8 PCs and tablets with x86 or ARM processors will support the platform -- in the more traditional desktop mode, that is. The version of Internet Explorer 10 built for that interface will play nicely with Flash. Those users who opt for the new Metro UI, on the other hand, will be out of luck on the Flash front, thanks to a lack of plug-in support. Between Adobe's work in the HTML5 world and the ability to build Flash-like apps using Air for the Metro interface, however, the company seems to have most of its bases covered in Windows 8 land. Check out evidence of Flash running in Windows 8 after the break, courtesy of Qualcomm.
Saturday, 17 September 2011
Splitfish FragFX Shark 360 starts shipping for your first-person shooting pleasure
Samsung Focus S wanders through FCC en route to AT&T
Charts, diagrams, charts, measurements, and more charts. This summation of nearly every document that passes through the FCC sounds only slightly more fun than staring at the Matrix all day, yet we still find ourselves a bit giddy when seeing highly anticipated phones take their turn getting the Federal nod of approval. And so it is with the Samsung i937, which is most likely the Focus S -- one of three tantalizing Windows Phone choices aimed at reaching stores "this fall." It's about what we'd expect, really: aside from sporting the usual AT&T frequencies, there's not much more that we can discern from the pages and pages of numbers and colorful pictures that depict phone radiation. Exciting stuff, we know, but Windows Phone 7.5 is at least one step closer to being in the clutches of our lonely mitts.
Targus to release new WiFi PAN-equipped Laser Mouse this September, flips Bluetooth the bird
Back in 2008, Ozmo Devices paired up with Intel to get its WiFi PAN (WiFi Personal Area Network) tech into low-power devices. Fast-forward to a few years later, tack on a new partnership with Targus and get ready for the first of those Bluetooth-less peripherals to hit the market. The company's new accessory teammate is planning to rollout a line of WiFi Laser mice that incorporate the OZMO2000 chip, with the first mouse to hit sometime this September. The unreleased AMW58US model will connect directly to your computer's WiFi receiver and packs a four-way scroll wheel, laser sensor and compatibility for Windows 7 -- batteries included. There's no pre-order page available at the moment, so you'll just have to sit tight and wait it out
ViviTouch haptic technology hands-on: electroactive polymer giving a 'high definition feel'
Haptic feedback isn't exactly something that'd blow people's mind these days, with most mobile devices and gaming controllers already packing a little vibrator to spice up one's gaming experience. While these motors do the job just fine for delivering the sensation of large engines and explosions, their monotonic performance and relatively high minimum output threshold means they can't reproduce finer vibration. For instance, you wouldn't be able to feel a guitar string fade away after a strum, nor would you feel the finer end of a spring recoil. This is where Bayer MaterialScience's ViviTouch -- previously dubbed Reflex -- tries to fill the void.
For those who aren't familiar, the magic behind ViviTouch is its electroactive polymer (or EAP in short) -- imagine a thin sheet that consists of two electrode layers sandwiching a dielectric elastomer film, and when a voltage is applied, the two attracting electrodes compress the entire sheet. This slim, low-powered ViviTouch actuator module can be placed underneath an inertial mass (usually a battery) on a tray, thus amplifying the haptic feedback produced by the host device's audio signal between 50Hz and 300Hz
For those who aren't familiar, the magic behind ViviTouch is its electroactive polymer (or EAP in short) -- imagine a thin sheet that consists of two electrode layers sandwiching a dielectric elastomer film, and when a voltage is applied, the two attracting electrodes compress the entire sheet. This slim, low-powered ViviTouch actuator module can be placed underneath an inertial mass (usually a battery) on a tray, thus amplifying the haptic feedback produced by the host device's audio signal between 50Hz and 300Hz
Eyes-on with Thunderbolt on Windows at IDF 2011
Sure, you've seen the announcement of Thunderbolt on the PC, the chips that'll power it and a bevy of compatible accessories, but how about actual proof of Thunderbolt working on Windows? Hidden deep in the recesses of IDF's technical showcase, we found just that and immortalized it on video for all to see. Essentially the same Chipzilla demo as when we first witnessed the interconnect on Macs, we watched the playback of four 1080p streams devour over 700MB of throughput off a PCIe attached SSD.
Engadget takes over Times Square, courtesy of TS2
Remember when we took over Times Square last month? Contrary to comments-based speculation, we didn't drop several years' salary to see our names and faces (and pets) up in lights. We were actually shooting a segment for the Engadget Show about a new service from Times Square2 (TS2). The NASDAQ / Thomson Reuters alliance is working to increase engagement on the giant electronic billboards it controls in one of the most heavily trafficked spots in the US. The organization has designed a free API for developers, making it possible to create applications for its giant ad spaces on the side of the Thomson Reuters and NASDAQ buildings
Evolta robot to take on the Ironman Triathlon, conquer the course in a week
Panasonic's little battery-powered bot that could, the Evolta, has garnered our attention several times over the years. It's already climbed out of the Grand Canyon and walked 500km from Tokyo to Kyoto, but apparently neither was enough to prove it and its namesake batteries' true mettle. This time, Panasonic's putting three of the robots through the Ironman Triathlon in Hawaii, and they've got a week to swim 2.4 miles, bike 112, and run a 26.2 mile marathon. Unlike the meatbags running the race who have a day to finish, the robots get a week -- though they'll be doing their thing 24 hours a day while only taking breaks to recharge their three AA batteries. Intrigued? The race starts on October 23rd, so there's plenty of time to watch the appropriately dramatic video explaining the challenge facing the triumvirate of tiny triathletes after the break.
Dean Kamen files patent application for an inflatable, illuminated wind turbine
Inflatable wind turbines may not be an entirely new idea, but prolific inventor Dean Kamen has detailed one of a slightly different sort in a recently published patent application. In addition to generating energy for general use, the turbine would also be able to power a set of LEDs adorning the turbine itself, which could be used to display advertising or other information using a persistence of vision effect. The application even suggests that multiple turbines could be linked together and synchronized to form one large billboard. Of course, it is still just that, a patent application -- but it is assigned to Kamen's DEKA company, so it may not be quite as far off from reality as some other applications.
Thursday, 15 September 2011
Insert Coin: Teagueduino solderless electronic board
We've seen the Arduino platform used to do some very, very cool things. You can pick up one of these incredibly versatile contraptions for well under 100 bucks, putting it within reach of the entire gamut of advanced hardware developers. But as simple as it may be to use for the technically inclined, there's still quite a bit of programming required, and you'll probably need to know your way around a soldering iron as well. The Teagueduino sets out to simplify the process, replacing intimidating code with simple drop-down menus, which you can adjust in realtime, giving you instant feedback as you make adjustments to your 'coding' handiwork. The second piece of the puzzle is the Teagueduino board itself, which includes snap-enabled inputs and outputs (yes, that means you can leave the finger-melting soldering iron to the pros).
The hardware/software duo first made an appearance this spring, but it just popped up on Kickstarter, which means the Teagueduino could be making its way to a DIY project near you in the not-so-distant future. Unfortunately it's not cheap -- you'll need to pledge $160 to get a fully assembled kit, while $260 adds extra I/O terminals. The Teagueduino is nearing the halfway point of its $22,000 funding goal with 27 days left to go, and if all goes according to plan, you should have your kit by November. Jump past the break for an overview with the designers.
Sharp Aquos SH8298U 3D smartphone goes under the knife, comes out in China
Same phone, different market -- that's pretty much what we're looking at above with Sharp's "new" 3D Aquos SH8298U. We first got our hands-on this device's twinner -- the Aquos SH-12C -- back at Computex, with that model sporting the Japan-only 1seg receiver, FeliCa (NFC) and 800MHz / 2100MHz bands. This time out, the OEM's made some subtle changes to its China entry, reducing the handset's storage from 8GB to 2GB, and packing it with GSM / WCDMA / HSPA radios. The rest of the spec list remains exactly the same, leaving this skinned Android 2.3 phone with a 4.2-inch qHD stereoscopic 3D display, dual 8 megapixel cameras, 512MB RAM and a 1.4GHz Qualcomm MSM8255 Snapdragon processor. If translated pressers are your idea of fun, go ahead and check out the source.
Cowon's iAudio 10 does "Color Therapy," won't charge you per hour
After a bit of teasing, Cowon's finally ready to show the world the iAudio 10. The skinny new portable media player offers up a three-inch 240 x 400 display, mic-in, TV out, an FM radio, support for a number of different file types, a document viewer and capacities running 4GB to 32GB. That's all well and good, but what's really got the company excited is the Color Therapy UI, which lets you switch between a number of background and text colors. At the very least, it's sure to be a lot cheaper than paying for a shrink.
Subscribe to:
Posts (Atom)